Easy ChannelBender

Easy ChannelBendereasy_channelbender_new

More Info…

THE BETTER, FASTER BENDER.

For a more traditional approach to sign making, the Easy ChannelBender is our lowest cost, complete solution. This machine can manufacture both flanged and reverse channel letters in 2½″ to 10″ heights. It can process flat aluminum coil in thicknesses from .032″ to .063″. Flange widths and notching distances can be adjusted effortlessly for ultra-smooth arcs and to avoid unnecessarily slowing your machine when bending large arcs where notches can be spaced further apart.

The Easy ChannelBender is the perfect tool to automate the previously time-consuming, labor-intensive task of channel letter bending by hand.

Specifications Easy ChannelBender
Power System
Oil Pump
220VAC, 15A, 50/60Hz, 1P
220VAC, 6.4/3.7A (maximum/typical)
Dimensions
(W x D x H)
System
Coil Cassette
Profile Table
77″ × 39.5″ × 59″
30″ × 30″ × 57″
None
Features Lateral routing of angles
Maximum flange thickness
V-cut (relief notch)
Flange depth (straight)
Cut-off tool for batch processing
None
Up to .063″ (1.6 mm)
35°, 60°, 100°, 130° on flange
Adjustable – 1/4″, 3/8″ or 1/2″
Yes
Bending Maximum angle
Smallest radius that can be bent a full 180°
Shortest distance from end to a sharp bend
Shortest distance from start to a sharp bend
100°
.3125″ (8 mm) radius
1.57″ (40 mm)
.4″ (10 mm)
Coil Material Outside diameter
Thickness
Height
26″
.032″ – .063″ (.8 mm – 1.6 mm)
2.375″ – 10″ (60 mm – 254 mm)

footer logo


Sales & Service

SDS/AdamsTech
Boulder, Colorado USA
(303) 798-7110
info@channelbender.com


Manufacturing

SDS, Inc.
27171 Burbank
Foothill Ranch, CA 92610