Super ChannelBender

Super ChannelBender



Our flagship automated channel letter bender, Super ChannelBender can produce both flanged and reverse channel letters in 1″ to 8″ heights. In addition to .026″ to .063″ thick aluminum, and depending on thickness, brass, bronze, and stainless material, Super can process LetterBox® and LetterForm®, our proprietary extruded aluminum return materials. Eliminating the need for conventional plastic or aluminum trim cap, LetterBox and LetterForm enable sign makers to fabricate Trimless® Channel Letters.

Super ChannelBender’s unique ability to broach return material, cutting a shallow groove vertically across the interior face, results in crisper, sharper bends and intricate shapes previously thought impossible to automate, like ¼″ serifs.

Specifications Super ChannelBender
Power System
Oil Pump
220VAC, 15A, 50/60Hz, 1P
220VAC, 6.4/3.7A (maximum/typical)
(W x D x H)
Coil Cassette
Profile Table
93″ × 43.5″ × 59″
30″ × 30″ × 57″
78.75″ × 15.75″ × 46.5″
Features Lateral routing of angles
Maximum flange thickness
V-cut (relief notch)
Flange depth (straight)
Cut-off tool for batch processing
Adjustable depth (V-type)
Up to .063″ (1.6 mm)
35°, 60°, 100°, 130° on flange
Bending Maximum angle
Smallest radius that can be bent a full 180°
Shortest distance from end to a sharp bend
Shortest distance from start to a sharp bend
120° (coil), 100° (LetterBox)
.2″ (5 mm) radius (coil), .6″ (15 mm) radius (LetterBox)
1.57″ (40 mm)
.2632″ (6 mm)
Coil Material Outside diameter
26″ only
.026″ – .063″ (.66 mm – 1.6 mm)
1″ – 8″ (25 mm – 203.8 mm)
LetterBox Thickness
1.2 mm (approximately .050″)
60 mm and 100 mm
3 m (approx. 10′) strip or 27 m (approx. 96′) coil
LetterForm Thickness
1 mm (approximately .040″)
60 mm and 100 mm
30 m (approx. 100′) coil
adams tech logo icon
sds logo icon
international sign association logo icon
sign association of canada logo icon
united states sign council logo icon

Adams Technologies, Inc.
Boulder, Colorado USA
(303) 798-7110